We are sorry to announce that Beta85X HD is discontinued and will not be available for sales anymore. We recommend you buy itsgreat alternativeBeta85X HD Digital VTX.

NOTE: Beta85X 2-3S Quad DSMX and FCC versions will delivery USA frequency in default.

USA frequency table below. The frequency in red item is invalid.

Extreme power & speed compatible with 3S battery, BLHeli_32 16A ESC, EMAX Avan 2″ props and 1105 6000KV motors, Beta85X definitely gives you more power and punch, the most thrilling flying experience you’ve ever had in flying whoop drones. You can rip it in the race, do cool freestyle and even dive a building.

Note: DO NOT FLY WITH 4S BATTERY.

BULLET POINT

• Beta85X pushes thenew era of brushless whoop drones to a higher level. With the new power system, you could fly real acro even with an HD DVR camera in racing or freestyle.
• With the high-performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware. This is also the first 2″ BNF drone that comes with BLHeli-32 ESC.
• Durable and light enough frame is customized for the Beta85X. Except for the traditional carbon fiber frame, another choice of plastic frame for your 2″ props drone.
• Whole drone no soldering or tinkering necessary. Customized lightest 11056000KV motors with cable connectors. Just plug and play. EMAX Avan 2″ prop is the best combo in this Beta85X drone.
• 450mAh 3S high rate battery is recommended by default. But pilots could also use their own batteries with battery strap. Optional and affordable.

SPECIFICATION

• Weight: 58g (without battery)
• Motors:11056000KV with connector
• Props: EMAX Avan 2″ 4-Blades Props
• HD DVR Camera: CADDX Turtle V2 ( for HD DVR version)
• Receiver Option:Frsky XM+/DSMX/FutabaS-FHSS/Flysky/TBS Crossfire
• Frame:Beta85X Frame
• 5.8G VTX antenna: Foxeer 5.8G Lollipop 3 Antenna
• Battery strap fits for micro 2S-3S battery

FC SPECIFICATIONS

Find more details about this2S F4 FC board in another page.

• CPU: STM32F405
• Six-Axis: MPU6000
• Size: 26mm x 26mm, whoop mounting pattern
• Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
• OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
• Smart Audio port is available for radio control VTX

ESC SPECIFICATIONS

Find more details about thisBLHeli_32 ESC boardin another page.

• MCU:STM32F051
• Supports Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
• Input voltage: 2S-3S lipo
• Cotinue current: 16A
• Peak current: 25A
• BLHELI_32 Firmware target: -16A-32bit

HDCamera and VTX

• Output power: 0mW, 25mW and 200mW (Adjustable)
• Smart Audio function is included for radio control
• Antenna: Foxeer 5.8G Lollipop 3 Antenna
• Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
• CADDX Turtle V2
• TV System: NTSC
• Field of view: 100-120 degrees with 1/3 lens

In the Beta85X design, the part of HD DVR is independent from the drone. You could mount or remove the HD DVR part very easy. In default, the drone is come with CADDX Turtle V2 HD camera and the camera tilt is switchable from 25 to 35 degree.

The canopy for HD DVR camera is 3d printing with SLA, which is compatible with Runcam Split Mini 2.

Download theSTL Filefor the HD camera mount.

BLHELI_32 ESC

BLHeli_32 is the 3rd generation ESC firmware after BLHeli and BLHeli_S, whichis written for ESCs that utilize 32-bit MCU.With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200!

Beta85X is the first 2″ BNF drone that supports BLHeli_32 ESC. With the other power system parts, EMAX Avan 2″ propellers and 1105 6000KV motors, it gives you the highest performance in flying experience.

Know more about BLHeli_32 ESC fromOscarliang’s blog.

PROPS OUT

The Beta85X drone also comes with “props out” by default. Why we need “props out” direction?

Default Betaflight props direction, quadcopterdips and “washes out” in hard corners.With reversed props or “props out”, no more dipping even in hardest cornering.

Know more about “Props Out”.

HD Camera and Z02 VTX

The primary purpose of the Beta85X drone is for a cinematic whoop drone. Many politsrevamp their Beta75X to HD whoopdrone–They add a HD DVR camera on Beta75X drone to get high defination and beautiful flying footage and video. Inspired by this, we want to provide a BNF whoop drone with HD DVR cameraby default so that pilot do not need to assemble it by hand and also get more power on punch for acro mode.

• Output power: 25mW and 200mW (Adjustable)
• Smart Audio function is included for radio control
• Antenna: Customized ZRC antenna
• Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
• Caddx Turtle V2 Camera
• TV System: NTSC
• Field of view: 100-120 degrees with 1/3 lens

PACKAGE

• 1 * Beta85X HD 2-3S Whoop Quadcopter

There are no batteries included for all version. You should purchase 2-3S batteries (XT30) seperated.