We are sorry to announce that Beta85X HD is discontinued and will not be available for sales anymore. We recommend you buy itsgreat alternativeBeta85X HD Digital VTX.

Not only support 4S power, but also possesses high quality video and clear footage. What an awesome drone! Equipped with 1105 5000KV motors, new F4 V2 4S FC, BLHeli_32 and Caddx turtle V2 camera, using singleN-channel MosFETs, soldering with 25V/220uf electrolytic capacitor, enable you to enjoy the powerful flight and beautiful scenery at the same time. Great choice for cruising, you can get tons of fun and speed in this cinewhoop.

Latest testing video of Beta85X HD 4S

Beta85X HD Crusing the Wonderland by Benoit

Beta85X HD Freestyle Flight by BGUFF

(Note: the video is upscaled to 4K. The Caddx Turtle V2 Camera used on the Beta85X supports 1080p)

Le Cinewhoop bySEKILE FPV

“CineWhoop” (Beta85x / DJI Mavic Pro) byLarsco FPV

For more videos about theseBeta85X Whoop drones, please check here:

More Overview Videos

Have any questions about Beta85X Whoop drone?Join our group on Facebook:

– Micro FPV Drones and Gears

POWER-WHOOP GROUP

BULLET POINT

• Beta85X pushes thenew era of brushless whoop drones to a higher level. With the new power system, you could fly real acro even with HD camera on 4S power.
• With the high-performance STM32F051 processor FC boards and tuned BETAFPVF405(BEFH), faster input signals with lower latency and higher update rates are reachable, give you much more power.
• Comes with upgraded F4 V2 4S FC, this FC is equipped with ports that support to plug the receiver, ESC, led board and VTX directly, no need to solder, convenient for installation.
• Durable and light enough frame is customized for the Beta85X. To increase its stability, we specially add an extra stiffener brace of carbon fiber. Whole drone no soldering or tinkering necessary.
• Upgraded 1105 motor from 6000KV to 5000KV, with a lightweight but definitely will give you extreme power and speed to support 4S. Motor comes with cable connectors. Just plug and play.
• 450mAh 4S high rate battery is recommended by default. But pilots could also use their own batteries with battery strap. Optional and affordable.

For 85mm brushless whoop drones, there are3 versions for your choice –Beta85X FPV,Beta85XHDandBeta85X V2.

Specification

• Weight: 84.6g (without battery)
• F405 Flight Controller & 16A BLHeli_32 ESC V2.0
• Motors: 1105 5000KV with connector
• Props: Gemfan 2020 4-Blades Props
• Camera: Caddx Turtle V2 Camera
• Canopy: Canopy for Caddx Turtle V2
• Receiver Option: Frsky XM+ / DSMX / FutabaS-FHSS / Flysky/ TBS Crossfire
• Battery:4S 450mAh Battery(Not including)
• 5.8G FPV antenna
• Battery strap fits for micro 2S-4S battery
• Flight time:4min – 6min with 450mAh 4S battery (smooth flight in a windless environment)

FC SPECIFICATIONS

Find more details about this F4 V2 4S FC in another page.

• CPU: STM32F405
• Six-Axis: MPU6000
• Size: 26mm x 26mm, whoop mounting pattern
• Firmware version: BETAFPVF405(BEFH)
• OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)

ESC SPECIFICATIONS

Find more details about thisBLHeli 32 ESC boardin another page.

• Support BLHELI_32
• Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
• Input voltage: 3-4S lipo
• Cotinue current: 16A
• Peak current: 19A
• Firmware target: -16A-32bit
• MCU:STM32F051K66

HD Camera andA01 VTX

The primary purpose of the Beta85X drone is for a cinematic whoop drone. Many pilotsrevamp their Beta75X to HD whoopdrone–They add an HD DVR camera on Beta75X drone to get high definition and beautiful flying footage and video. Inspired by this, we want to provide a BNF whoop drone with an HD DVR cameraby default so that pilots does not need to assemble it by hand and also get more power on punch for acro mode.

Besides that, the newestA01 VTXboard is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.

• Output power: 25mW and 200mW (Adjustable)
• Smart Audio function is included for radio control
• Frequency: 5.8GHz 6 bands37 channels, with Raceband: 5362~5945MHz
• TV System: NTSC/PAL
• Image Sensor: 1/3″ CMOS
• Horizontal Resolution: 1200TVL
• Lens: 2.1mm(M8)

Inspirations by YKS’ footage with Beta75X.
Now the Beta85X HD version is here !!!

Know more about cine whoop fromNURK FPV’s blog.

In the Beta85X design, the part of HD DVR is independent of the drone. You could mount or remove the HD DVR part very easily. In default, the drone comes with a CADDX Turtle V2 HD camera.

The canopy for HD DVR camera is 3d printing with SLA, which is compatible with Runcam Split Mini 2.

Download the STL Filefor the HD camera mount.

Parts Updated

This Beta85X has upgraded ineveryindividual partlike FC, ESC, Motor, etc. Which can support 4S power with asteady performance and bring you into aglorious FPV world.

F4 V2 FC

• Extra 4pluggable portsforESC, VTX, RX and LED board, convenient installation and decreasing the dislocated PIN mounting.

16A BLHeli_32ESC

• Support 4S Power. Written for ESC’s that utilize 32-bit MCU.With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200!
• Using singleN-channel MosFETs on ESC board, which has a lower inner resistance. It is dual MosFETs on the original BLHeli_32 ESC board.
• Current sensor included.

• Soldering with 25V/220uf electrolytic capacitor, for reducing the defective rate caused by the instantaneous high voltage.

* Know more about BLHeli_32 ESC from Oscarliang’s blog.

1105 5000KV Motor

• Lower 5000KV for new Beta85X4S, which could support 4S power which won’t cause the issue ofoverheat or burn (maybe the ESC).

We DO NOT recommend the 1105 6000KV motors for 4S power becausethe motor may overheat or burnwhich will cause permanently damage on the motor or ESC. And don’t use 1105 5000KV motors for 3S power, the performance will not be as good as the 1105 6000KV motors since lack of power.

Beta85X Frame

• The Stiffener Brace of Carbon Fiber can reinforce the Beta85X frame, avoid the instability caused by too strong power when Beta85x is flying.

• Extra screws holes to fix the ESC, can prevent ESC from loosening and solve the adversewear and tearreaction from ESC and FC caused by vibration.

Package

• 1 * Beta85X HD Whoop Quadcopter(4S)
• 1 * OSD Menu Board

There are no batteries included for all version.High recommend the450mAh 4S battery.