X-Knight 4” FPV Toothpick Quad – The lightweight 4 inch toothpick.

Have you heardthenew rule of Remote ID from the FAA (Federal Aviation Administration)?Are you worried about your 4in and 5in drone? This lightweight X-Knight 4” Quadis only 130g, which is below 250geven with the battery,and it is still powerfulenough as the 5in drone. Make your flight easier without limitation.

Bullet Point

• The lightweight 4-inch toothpickbelow 250geven ifyou connect with the battery, meet the current requested of FAA rules.
• Assembled 4” frame kit, which adopts T700 carbon material becomes ultimate durability while maintaining minimal weight 24.43g.
• The first carbon fiber series installs Toothpick 20A 2-4S AIO flight controller, which can supports up to25A continuous currents.
• Integrates with15053600KV motor, X-Knight offers unparalleled execution in thrustand control.
• Supports up to 850mAh 4S battery.It has plenty of power and punches to do all the tricks and flips you want.

Specification

• Weight: 129.6g (without battery)
• FC&ESC20A Toothpick F4 2-4SAIO FC V3.0
• Motors:15053600KV Brushless Motors
• Props:HQ4025 2-Blade Props
• Battery:850mAh 4S battery
• Camera: Caddx RatelCamera
• VTX:A01 25-200mW 5.8G VTX
• Frame: X-Knight Carbon Fiber 4” Frame Kit
• Canopy:Canopy for Mini Camera V3
• Receiver Option: Frsky XM/DSMX/FutabaS-FHSS/TBS Crossfire
• Flight time: 3:30-7:30mins withXT60 4S battery

Flight Controller

Toothpick F4 2-4S 20A AIOFC V3.0-The firstquadcopter installs all-in-one 20A Toothpick FC, which can handle 20A continuous current(25A burst)and provide with massive levels of performance capability while still maintain ultralight only 6.63g.Possesses a high-performance STM32F411CEU6 processor and tuned BETAFPVF411(BEFH), which provides much more power on 4S.

Motors

1505 3600kv motor hits the nice spot for high-powered 4s 4” toothpick builds with the ability to swing up to 4″ props with ease. Combined with 20A Toothpick F4 AIO FC, which will provide you enough output power.

Camera & VTX

The Caddx Ratelis a great camera choice for both night flight as well as during the day! Equipped with a high quality 1/1.18″ HDR sensor, it provides up to 0.0001 Sensitivity of lux. It is very versatile in that you can switch between PAL and NTSC video and also between 4:3 and 16:9 video formats. Latency is super low at only 8ms.

Specifications of Camera

• Image Sensor: 1/1.8″ Inch starlight HDR sensor
• Horizontal Resolution: 1200TVL
• FOV: 180 Degree
• Min. Latency: 8ms
• TV System: NTSC & PAL (changeable)
• Image: 16:9 & 4:3 (changeable)
• WDR: Super WDR (HDR)
• Min. Illumination: Starlight
• Synchronization: Internal
• Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
• S/N Ratio: >60dB (AGC OFF)
• Video Output: CVBS
• Camera OSD: Separate OSD
• DNR: 3-DNR

Specifications of VTX

A01 VTXboard is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW.SmartAudio is available for VTX remote control in default.

• Output power: 25mW and 200mW (Adjustable)
• Smart Audio function is included for radio control
• Frequency: 5.8GHz 6 bands37 channels

X-Knight Carbon Fiber 4” Frame Kit

Our first assembled 4” frame kit, which adopts T700 carbon material becomes ultimate durability while maintaining minimal weight 24.43g. It consists of arms, bottom plate and top plate, which allows you to replace the damaged part. Meanwhile, thetop plate comes with press nuts to make theinstallation process easier.

Injection Molded Canopy

MiniV3 canopyspecially designed for 19-20mm camera, which adoptsinjection molded process and PE material,much durable than the original canopy.

Provided withSTL Filefor the canopy.

Recommended Battery

850mAh 4S battery with XT60 connector is the best option to power X-Knight 4Ich quad. We highly recommended the 850mAh 4S battery.

Package

• 1 * X-Knight 4Inch Toothpick FPV Quad
• 1 * HQ 4025 2-Blade Props (4pcs)
• 1 * Set of M2*7 screws

*Battery isNOTincluded.